Welcome Guest [Log In] [Register]
Photobucket
Welcome to Mercedes-190.co.uk

We are the Mercedes 190 owners forum, the place to be for all owners and fans of the Mercedes 190E, 190 and 190D cars. Including Cosworth (2.3 16v and 2.5 16v), EVO 1 and EVO 2 models. Modified and concourse, track cars and daily drivers, all are welcome.

This free UK based forum was started back in November 2005 to serve the Mercedes 190 W201 community and now has over 9000 members from all around the world and 600,000 + posts.

The members welcome you and encourage you to stay a while and have a look around.
We offer you friendly chat and access to some very useful information as well as tutorials with photos and videos for many common repair and maintenance jobs.
Whatever your needs there is a good chance you will be able to find what your looking for. Such as our Mercedes 190 buyers guide

Sign up to gain access to all areas including for sale / classified areas and country wide meetings and events. Many forum features and sections are only available once you sign up.

Join our forum at mercedes-190.co.uk!

If you're already a member please log in to your account:

**New members signing up**
please check your junk mail for the email authorization email
otherwise we cannot verify your new account.
I have noticed a lot of unauthorized accounts in the system.
Regards
Admin

Username:   Password:
Add Reply
Bodykit Clip diagram; May be of some help...
Topic Started: Mon Mar 5, 2007 7:11 pm (23,779 Views)
scherrit
Part of things
[ *  * ]
Hi,
I am trying to have a windscreen replaced and today the tech said, nope the screws are rusted in place on the A pillar trims (one per side, the lowest screw). I have drilled out the screws and so am ready to get the screen replace only trouble is that the plastic insets in the body on the pillar are a bit shagged now from the drilling and I'd liek to replace them. It looks to me as if later facelift models had rivets where my pre face lift has self tapping screws into the plastic inserts- and I am struggling to get the part (and the part number!)

is this right? http://www.ebay.co.uk/itm/X5-Clip-Seitenleiste-Klammer-Seitenverkleidung-Mercedes-W124-W201-190-024-442-/281852937971?hash=item419fbe86f3
Offline Profile Quote Post Goto Top
 
scherrit
Part of things
[ *  * ]
Posted Image

anyone do me a part number for this plastic clip, it is the back edge of the front door sacco, takes a screw from the inside:

https://goo.gl/photos/57QHCmyv5k3s93YP7

Edited by scherrit, Mon Dec 26, 2016 1:24 am.
Offline Profile Quote Post Goto Top
 
scherrit
Part of things
[ *  * ]
Grr, can't get the pic to show..... also this clip has been mastic'ed on. it's for the top back screw on the passenger side sacco. Anyone know it's part number??
Offline Profile Quote Post Goto Top
 
scherrit
Part of things
[ *  * ]
Anyone? I have access to the EPC via the club but teh diagram is not very helpful.
Offline Profile Quote Post Goto Top
 
scherrit
Part of things
[ *  * ]
Now that everyone is back from hols.... any ideas?
Offline Profile Quote Post Goto Top
 
Salzam100
Part of things
[ *  * ]
Hi there , im in need of some clips for my sacco panel off my passenger front door , they have all been damaged by the previous owner .
I need a full set for the panel .

Could i get the part numbers for all needed?
The top ones are the ones that slide to lock the panel and the bottom ones are push and lock clips .

Any help would be great !
Offline Profile Quote Post Goto Top
 
optimusprime
Member Avatar
Part of things
[ *  * ]
Check them out on ebay ..
Offline Profile Quote Post Goto Top
 
Salzam100
Part of things
[ *  * ]
Link ?
Offline Profile Quote Post Goto Top
 
MitNik
Newbie
[ * ]
Anyone has the part numbers for the screw set of 2.3 16v boot spoiler?.
Offline Profile Quote Post Goto Top
 
wazb
Newbie
[ * ]
Any one have the diagrams for the side skirts?
Offline Profile Quote Post Goto Top
 
1 user reading this topic (1 Guest and 0 Anonymous)
« Previous Topic · Bodywork & Exterior · Next Topic »
Add Reply


Email me if anyone replys